Winmodems

L

lcp

New Member
#1
I have been using a USR 33.6 winmodem for some time now and having no problems with it. I would like to upgrade to a 56K modem. I have noticed that a lot of people say to avoid winmodems. Even some ISP's say to avoid them. Could anyone tell me why. Also does anyone know of a good internal modem that is not a winmodem that is under $100.
Any advice would be appreciated.

lcp
 
S

sushi-roll

New Member
#2
Hi there,

Get a AOpen modem. It is an ISA modem and it only cost me 50 bucks Canadian.
 
Sir Flannel

Sir Flannel

Resident Curmudgeon
#3
Well, the reason to avoid Winmodems. In order to make them cheaper, they have no onboard controller chips. On the older modems (ISA modems)have a chip on them that control their function. The PCI modems use software loaded with Windows. Thie means the modem can't run in true DOS mode, and it also means the CPU has to work a little harder. Now, if you have a PIII 550, you might not notice any performance hit, but older machines will slow down a bit. Hope that helps answer your question...
Michael
 
A

AndyK

New Member
#4
I just installed a motorola sm56 software modem to try it and found that I am connecting at 49333 when on my modular technology isa hardware modem (rockwell chipset) I connect at 45333 or 46667, so I think I will leave the sm56 in for a while.
I have a K6-2 400 on a p5a and the sm56 only cost £20 in UK.
 
R

rockinwy

New Member
#5
dont bother with the upgrade just buy a new modem I upgraded my 33.6 winmodem and it worked for a while and now nothing above 31.2 works right and the downloads are really slow, tech support was no help either.
 
s4

s4

Compulsive Web Surfer
#6
I bought a new USR Winmodem last year, and later sold it for practically nothing. It worked for a while and then wouldn't connect at all.
 
L

lcp

New Member
#7
Thanks to everyone that replied to my post.
I have bought a new 56K modem. I didn't get a winmoden.I bought a USR model 5687 and so far I am very happy with it. Connecting at 49,333
each time.
Thanks again.

lcp
 

Associates