Why are only two optical interfaces displayed after a 4-Port front card is installed in Huawei S5300?

I

isabel131

New Member
#1
Why are only two optical interfaces displayed after a 4-Port front card is installed in Huawei S5300?
 
A

adamxx88

New Member
#2
This is because no extended channel rear card is installed in the switch.

Huawei S5300-SI or S5300-EI switch can provide only two optical interfaces for a front card. If a 4-port front card is installed, the switch must use an ES5D00ETPB00 extended channel rear card to provide the other two interfaces. Without an extended channel rear card, only two optical interfaces are displayed.

*If a 4-port GE front card (LS5D00E4GF01/LS5D0E4GFA00) and an ES5D00ETPC00 rear stack card (working normally) are used together in a switch, only the first and second interfaces on the front card can work normally, and the other two interfaces cannot be used.
*If a 4-port 10GE front card (LS5D00E4XY01) and an ES5D00ETPC00 rear stack card (working normally) are used together in a switch, only the first and third interfaces on the front card can work normally, and the other two interfaces cannot be used.
 

Associates