Shuttle AK31 v3.1 Voltages

[MorfinX]

For those of you that have this board, what are your voltages on +3.3v, +5v and +12v rails?

------------------
Athlon XP 1600+ @ 1800+
Alpha PAL6035 w/ 40cfm YS Tech
Antec 1030B
Shuttle AK31 v3.1
256MB OCZ DDR300 CL2
VisionTek GF 256 SDR
40GB WD 7200RPM ATA100
8.4GB Maxtor 5400RPM ATA33
SB Live

 

[bpratt]

Morf - I am running 3.25, 4.95, 12.22, measured with MBM. What are yours? I still think that might be your HD problem.

Bill

------------------
XP1600 [email protected]
AK31 v3.1, MC462
256MB Crucial PC2100 Cas 2
IBM 60GXP,20Gig HD
Fong-Kai FK603 case & Antec 400W PS
Matrox G-550 & VG151b LCD
Teac CD-516EB, Zip 250 Int
Linksys 10/100

 

[MorfinX]

Mine is about the same: 3.25, 4.89-4.95, 12.22. I guess it's just the board, not the PSU. Stupid WD HD, never buying another one from them again. I saw a 400W Macron PSU that is AMD Recommended for $49.99 though. I was thinking about getting that later. BTW, which rail drives the video card again? I forgot.

------------------
Athlon XP 1600+ @ 1800+
Alpha PAL6035 w/ 40cfm YS Tech
Antec 1030B
Shuttle AK31 v3.1
256MB OCZ DDR300 CL2
VisionTek GF 256 SDR
40GB WD 7200RPM ATA100
8.4GB Maxtor 5400RPM ATA33
SB Live

 

[cyberstat]

I get 3.25~3.33, 4.87~4.95, and 11.90~12.25 with my 350W Enermax. Wish I'd gotten the 430W, though.

------------------
T-Bird [email protected] (9.5x160)
PAL8045 w/46CFM Delta
Shuttle AK31 Rev3.1
384MB Crucial PC2100
Lian-Li PC60 w/Enermax 350W
Seagate Cheetah X15
Gainward GeForce3
Game Theater XP
Syncmaster 900NF