Overclocking GF2 GTS with 12.x Dets

S

S_Klass

New Member
#1
I looked around for a few mins and could not find how to do it. Anyone have the answer? I used to do it with coolbits when I was using Nvidia 6.50 but that doesn't work anymore.

------------------
-=S_Klass=- I tweak... therefore I am.

Proud Member of the OCN Hellspawns Genome Fleet
TeamID: 567443298
OCN Genome FAQ | OCN Genome Stats
 
S

S_Klass

New Member
#3
VisionTek GeForce II GTS 32MB DDR.

Got it for $175 when they were $299 retail. As you can tell I've had it a while.

------------------
-=S_Klass=- I tweak... therefore I am.

Proud Member of the OCN Hellspawns Genome Fleet
TeamID: 567443298
OCN Genome FAQ | OCN Genome Stats
 
squall3k

squall3k

New Member
#4
VisionTek dosent give you one? Both nvidia cards i have bought came with a overclocking utility.

I have a Cardex GFII MX 32 DDR and a
Hercules GFII Pro 64

both came with ocing utilities

The hercules is running at 225core/480mem
i will keep searching for ya though...

------------------
Insert Coin Here.
______
T-Bird 1.33 ghz @1.47ghz| Abit KT7A | 3D Prophet II GTS Pro

Member of the OCN Hellspwans [email protected] Team
OCN Stats Page | Overclockers Network
 
Z

Zerophobia

New Member
#6
You have the new NEDs and you cannot get Cool Bits to workie? gadzooks has it all worked out for you in step-by-step instructions. And remember if you hose your box while doing this, it is YOUR FAULT. And we will all laugh at you about it too. Just remember, we have already been there too often.

There is a way to bypass the incompatibilities that the latest Detonator series drivers have with the Cool Bits registry hack. After installing drivers that do not allow video card over clocking by the Cool Bits hack.
1. Make sure the Display Properties window is CLOSED.
2. Insert the nVCpl.dll from an older set of detonator drivers ( I use the 6.49's) into C:\WINDOWS\SYSTEM, and click YES when asked to over write the current file.
3. Use the Cool Bits hack like normal, reboot, click Enable Clock Frequency Adjustments in [H]ardware Options, reboot again.
4. Tweak to your heart's content.
5. Lather rinse and repeat.

What this trick does is replaces the control panel extension of the nVidia drivers that doesn't have the Hardware options tab with an extension that does. If you have any comments or questions send them to [email protected]

------------------
duron750[1000]
abit kt7a
256 pc133
hercules geforce2mx 32
sb16 pci
wdc 12gig udma66
netgear10/100+router
motorola cable modem

[This message has been edited by Zerophobia (edited 06-22-2001).]
 
D

danbfree

New Member
#7
Have you tried NOT using 12.41 WHQL with coolbits?? Coolbits won't work with any official WHQL certified driver since WHQL doesn't alow for overclocking...I use the latest leaked 12.90 for Win 9x.. The easiest way around the whole thing is to use a freeware called NVMax you can get at www.tweakfiles.com under the video section. Works with all drivers and is easy to configure...
 
B

Big Lar

New Member
#8
I use Nvmax as well, great little program


------------------
Help me get this Boot outta my azz!!!!
 

Associates