Having problem with SDRAM

G

grady25

New Member
#1
I have a 100mhz pentium, Win95. I had 24mgs of RAM. Worked fine. Anyway, my motherboard (VA-502) supports SDRAM. I have 2 banks for it. I bought a single 32mg SDRAM, installed it and it doesn't work. I removed all other RAM and just have the 32 in it. It doesn't load up. I do not see any jumpers near the banks to switch settings. HELP PLEASE!!
 
A

Avatar

New Member
#2
Okay, SDRAM breaks down into the following:

2 clock (PC66 only)
4 clock (PC66 & PC100)

If you have an older motherboard that came out around the time SDRAM did, you need to make sure you probably need a 2 clock version.
 

Associates