Few Questions - Cases and MB?

Trophy

Trophy

New Member
#1
It's a newbie question so have patience.

Are there cases where you could use either a 478 mb or a 370mb? Say if I use a mb with a socket 370 and in a few months decide to use decide a 478 are there cases like that?

Because I want to use my mb with a 810E chipset for now but I'm gonna switch in a few months.

TR1
 
Todd a

Todd a

New Member
#2
Motherboards have a size rating. Most are ATX or Micro ATX. An ATX case can fit both, but a MicroATX is too small to fit a standard ATX motherboard. The other thing you need to know is if the power supply will work. Most P4 boards have an extra power connector to supply extra power to the CPU. You need to make sure the power supply has this connector. Also the wattage of the power supply is pretty imortant. Chances are if you have an OEM computer with an i810 motherboard, then it is a budget box with the smallest power supply they could get away with. Likely it is 200w or less. This will not do. You normally want at least 300w for todays CPUs and some might even need 400w to be safe, especially if it is a genaric power supply.

A good case and power supply is Antec. Their Performance Series is very good, but a bit pricy ($80-120 or more)
 
Shinma

Shinma

____________
#3
Chassis dimensions and processor in use has no real bearing.

As Todd a already pointed out,
You should be looking at the form factor. ie. ATX form factor chassis for ATX form factor mobos...
 

Associates