Abit KT7/a Users...

[CenturionStrategy]

Has anyone tried the 3C bios??

It's the lastest official bios, you can get it here:
http://www.viahardware.com/faq/kt7/faqdownloads.html

Anyway, my point is that I'm still on the WW BIOS (the original one) on a KT7a. I tried all the Y series bios' (YH, etc.) BUT, I cannot overclock properly with them.

With WW, I run at 1GHz (7.5x133)
With YH, I can only get 933MHz, Maximum.

This is a pain, I don't want to be stuck in the stone age forever, so does anyone know if, a) the new BIOS is any good, or b) why the new BIOS' are so useless?

------------------
MY GOD!!! A RANDY SQUIRREL!

 

[dimme]

Funny, just flashed my BIOS from YH to ZT. My Duron 850 was stable as a rock at 1080MHz (144x7.5) with the YH BIOS, but the ZT BIOS made it unstable. Flashed it back to YH.

------------------
HWC FORCE3D ICQ AL= 57497564
OCN ICQ AL= 67864797

 

[tysidor]

CenturionStrategy---I have also been able to overclock the best with WW. WW has also been the most stable. To answer your question I haven't tried 3C. If you do post back and let me know how it goes.

 

[Berserker]

ZH 1.10B is the best BIOS for my [email protected] I've tried YH but get the ocassional BSOD and registry error upon boot up. ZH is supposed for the KT7E but it works great on my KT7A-R. Check out the modified BIOS at http://www.icronticforums.com

------------------
(o^_^o)

 

[Soneji]

I have a KT7-Raid with an 800D @ 1050Mhz. Is there better bios revisions out there that might help my 800 become stable at 1.1Ghz? Cheers dudes. Sj

------------------
IEXPLORE caused an invalid page fault in
module KERNEL32.DLL at 017f:bff7b9b7.

http://heatware.elitehardware.com/view.shtml?action=list&option=soneji