November 7th, 1998, 07:45 PM
I have an older Hewlett-Packard "Colorado 250MB" internal tape backup drive that I would like to install in my new computer.
The problem is, I have no installation manuals to follow.
I physically installed the tape backup unit into my computer.
I purchased a "ribbon" cable that could connect to both my 3-1/2" disk drive and my tape backup unit.
When I connected everything up, my 3-1/2" disk drive no longer worked and the tape backup unit failed to work too.
Am I doing something wrong here??
Are the 3-1/2" drive and tape backup unit completely different pieces of hardware??
I'm running Windows 98.
Any help would be greatly appreciated.
November 10th, 1998, 09:56 PM
My HP Colorado came with it's own cable that has to be plugged into the controller or mb directly and has a connection to connect to the floppy cable end that would have plugged into the controller. I've tried using a standard twisted floppy cable to not have to use 2 cables, but it didn't recoginize the tape drive. Don't know if this helps.
November 10th, 1998, 10:38 PM
Also, I should add that Win95 or 98 may not detect a tape drive until you install the software for it. It is a possibility that you might find an older copy of Colorado backup at some shareware sites.
I use floppy's mostly, and don't save much anymore, just word processing files and such.
November 19th, 1998, 03:32 PM
Don't want to suggest anything too obvious but I installed a tape drive and my floppy also quit working. I discovered I had accidentally plugged the drive in backwards at the motherboard. I actually had to install a new floppy to get it all straightened out. I learned an important lesson though: DOUBLE CHECK ALL CONNECTIONS!
November 21st, 1998, 05:52 PM
Try to plug the tape drive ribbon in first then the 3.5. If you have any questions e-mail me
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)