January 19th, 1999, 11:13 PM
I have recently added a PCI modem and a PCI Tv card. The problem is that sometimes when I restart the computer, Windows moves the modem to IRQ 12 which is also sharing my PCI video. Is there a way to keep the IRQ's from changing everytime I add a card? Plug and play doesn't seem to keep from having interrupt conflicts. Any ideas would be appreciated.
January 20th, 1999, 07:20 AM
deselect the "automatically choose settings for this device" box and set it up yourself. Then it will always stay the same and provided nothing else shuffles around, you'll have no problems.
January 20th, 1999, 12:42 PM
Thanks, I'll give it a try.
January 20th, 1999, 08:21 PM
normally you can set up the bios to where it won't change the settings
January 25th, 1999, 01:35 AM
What is wrong with the PCI cards sharing an IRQ, that is what they are supposed to do. If you look in device manager, is "IRQ steering" (x2) using the same IRQ as those two cards? Yes? everything is ok then.
January 25th, 1999, 03:13 AM
IRQ steering or any other variant (mine goes by the extremely long name of "ACPI IRQ holder for PCI IRQ steering") seems to be a new thing that reserves IRQs for your PCI cards. Currently I have 4 devices using IRQ 11!!! Anyway if it works, don't worry about it. I think it's good that PCI cards can share an IRQ, if they couldn't then I would have run out long ago. As it is I can't have both of my COM ports enabled. I don't need them anyway, but the IRQ limitations really do suck.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)