Cd Recorder
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 2 of 2

Thread: Cd Recorder

  1. #1
    Join Date
    Dec 1998
    Posts
    2

    Cd Recorder

    I just recently got a Memorex CRW-1622 Recorder for Christmas and I can't seem to get it to work. The problem is when I start up the program that came with it, it gives and error like this; "Unknown SCSI Request Block Status: E8 (Hex). And then it gives a a tip or what's wronng and that says that the SCSI bus needs to be terminated. How do I do this?
    Thanks alot,
    Richie

  2. #2
    Join Date
    Dec 1998
    Location
    Mason, OH, USA
    Posts
    10
    Ah, termination. All SCSI chains must be terminated. If it's an external device, it may require a physical terminator (If you look on the back of the device, you'll see two SCSI ports if it's external. The one not in use needs to have a terminator in it, if the device does not support auto-termination.) These go for $10-$25, but usually devices that require termination ship with a terminator.

    If it's an internal device, it may be a bit more problematic. Some internal devices support "auto-termination" -- this is a fancy way of saying that if a device is not detected further "downstream," then the chain is terminated. This must be set on the SCSI card (either by BIOS or jumper settings)-- however, it's usually the default. Those devices that don't support auto-termination require you to set a jumper or some such (usually) to indicate that your device is the last in the SCSI chain.

    Let me know if this helps!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •