Tape Backup
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 2 of 2

Thread: Tape Backup

  1. #1
    Join Date
    Nov 1998
    Posts
    3

    Tape Backup

    I have an older Hewlett-Packard "Colorado 250MB" internal tape backup drive that I would like to install in my new computer.

    The problem is, I have no installation manuals to follow.

    I physically installed the tape backup unit into my computer.

    I purchased a "ribbon" cable that could connect to both my 3-1/2" disk drive and my tape backup unit.

    When I connected everything up, my 3-1/2" disk drive no longer worked and the tape backup unit failed to work too.

    Am I doing something wrong here??

    Are the 3-1/2" drive and tape backup unit completely different pieces of hardware??

    I'm running Windows 98.

    Any help would be greatly appreciated.

    J. Day

  2. #2
    Join Date
    Nov 1998
    Location
    Marrero, LA USA
    Posts
    6
    Make sure the "ribbon" cable is connected to the floppy correctly. The part of the ribbon cable that has the twisted wires just before the connector must be plugged into the floppy. Try this and see if it helps.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •