Super Slot fan and v3 2k.

[dimme]

Does it cool the v3 2k well? It barely reaches the heatsink and does it suck or blow the äir out of the case?

[dionp]

The best fan i found was the tennmax fan. Replaces the heatsink & 1 minute to install. It really works well. Check out their web site at http://tennmax.com

[dimme]

I'm not so sure if I wanna take off the heatsink. What's th best thing after tennmax?

[AMD 300 + ABIT TX 5]

ive used an s7 fan i screwed it onto the default heatsink , its bigger than the default heatsink, but now it also blows some extra air over the card, a cool breeze never makes any troubles.

------------------
K6-3 400 2,4v Epox mvp3c2 v3 2000 pci @ 166mhz quantum 4,3g Soundblaster Live 1024

[Bomberman]

The slotcooler is great for extracting heat from your case. It could work well to use both the Socket7fan on your V3 2000 and the slotfan right under it (or 1 slot lower would be even better). This way the S7fan get's the heat from you card in your case, and the slotfan sucks the hot air out. This setup works great with my ViperII. (I also use a Tennmax cooler, and their great! If your carefull your card won't get damaged when removing the default heatsink.)
Only the slotcooler doesn't do that much though.

[dimme]

I put the slot cooler right under the voodoo3, but it gets hotter.

The reviews say "perfect under a voodoo3 or TNT2". Is that just bs? I'll try what you suggested Bomberman, thanks!