Installing V6600 Right now have A question?
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 2 of 2

Thread: Installing V6600 Right now have A question?

  1. #1
    Join Date
    Dec 1999
    Location
    Long Island, NY, usa
    Posts
    981

    Installing V6600 Right now have A question?

    says to set my disply to vga mode how do i do this...can i just goto my settings and remove the old driver???

    thanks
    OCN the The Darkside

  2. #2
    Join Date
    Aug 1999
    Location
    Norwich, UK
    Posts
    3,790
    Below is the readme that comes with the various Detonator betas, Copy & Paste all this into a note pad file and print it out, follow the readme instructions with regard to the VGA, until it says you must restart your system for the settings to apply, "click NO do not restart now"

    Then go into the Device manager in System and remove your current graphics card. You'll get the same message, say NO do not restart, and go to the start menu and Shut Down. Now you can change your card for the Asus and it should detect the card on boot up and ask you for a directory for the drivers, give it CD rom and it should guide you through the instalation.

    any problems repost here.

    BladeRunner

    Windows 98
    ----------

    To prepare for installation of the drivers

    1 Start Microsoft Windows 98.

    2 Click the Start button, point to Settings, and click Control Panel.

    3 Double-click Display, and click the Settings tab.

    4 Click Adapter, click the Change tab, click Next.

    5 Select the option to display a list of drivers, then click Next.

    6 Select Show all Hardware button, then select the Standard display types from the
    Manufactures list.

    7 Select Standard PCI Graphics Adapter (VGA) from the list, then select Next.

    8 Click Next to install the driver, click Finish, then select Apply to complete
    the installation.

    To install the drivers

    1 Click the Start button, point to Settings, and click Control Panel.

    2 Double-click Display, and click the Settings tab.

    3 Click Advanced Properties, click the Adaptor tab, then click Change.

    4 Insert the NVIDIA Compatible Display Driver Disk 1 into the 3.5" diskette drive.

    5 Click Next, click Next, then Click Next.

    5 Select or type the path to the 3.5" diskette driver, then click OK.

    Windows should find files for your NVIDIA graphics chip. If Windows cannot
    find the files, check that the path name for the diskette is correct and
    that the correct diskette is inserted in it.

    6 If Windows found the files, click Next.

    Windows copies the files to the hard disk.

    7 Insert the NVIDIA Compatible Display Driver Disk 2, and click OK when Windows asks for the
    NVIDIA Compatible Display Driver Disk 2.

    8 Click Finish to complete the installation.

    9 Remove diskettes from the diskette drive, then click Yes when Windows asks
    if you wish to restart the computer.


    Uninstall instructions
    ----------------------

    To uninstall the drivers

    1 Click the Start button, point to Settings, and click Control Panel.

    2 Double-click Add/Remove Programs, select NVIDIA Display Properties Extension, then click Add/Remove.



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •