Viper v770 3D mark y2k results

[Timo.T]

Hi! I got celeron 300mhz, 64mb RAM
I know it's very low system expecially RAM
but is result 900 right?

And in D3D games i can't run over 1024*768 smoothly...
I know it's probably my low RAM and prosessor, but if got something to comment;
DO IT!

[Joe Danfa]

you might want to try the sugestions on this post.


updating AGP drivers might help...but 64 megs just seems too little.

http://discussions.hardwarecentral.c...ML/006721.html

*also...what drivers are you using?

Joe.

[Timo.T]

I'm using nvidia 3.69 drivers.
Updating AGP-driver sounds good, but is this the right driver for my board (ASUS P2-99 440ZX)
http://www.asus.com/Products/Motherb...r_utility.html

thanks...

[Timo.T]

Okay...I updated AGP driver and everything is running LITTLE better now... Except quake3, difference is big!

[Kroblanx]

You can also try overclocking your Celeron 300 to 450 Mhz...You will get a tremendous boost in both system and gaming performance.

[Timo.T]

Thanks guys! I think I'll overclock my celeron...(as Kroblanx suggested)
Because I overclocked it from 300 to 337 and
3D MARK 2000 score raised 100 points!

Tell me your opinions about best drivers for TNT2...

[Ruffian]

You also might want to try overclocking your V770 also.