APG-peed on CL TNT2U
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 3 of 3

Thread: APG-peed on CL TNT2U

  1. #1
    Join Date
    Jul 1999
    Stavanger, Norway

    APG-peed on CL TNT2U

    Im running my Celeron @504, core 2,1V, Alpha cooler. I tried to boot it at 558, but it wouldn't work out. My question is:
    Have anyone of you any idea of how high a CL TNT2U can go?? I mean, the AGP speed @558 is like 80MHz. Is this a no-go or what?
    I don't think it's RAM related and I know it might be the CPU that can't handle this speed, but this dosen't matter, because I'm about to built a TEC-cooler.

    BTW: it seems like the "s" on my kbd got stuck (AGP-peed )

    [This message has been edited by Duckman (edited 09-28-99).]

  2. #2
    Join Date
    Apr 1999
    Shaw AFB SC, 29152
    Running the AGP bus at anything above 66 is potentially bad. Normally it's at 1/1 on a 66mhz fsb, or 2/3 on a 100mhz fsb.

    You could try it at 2/3 75 or 83mhz, but that's likely slow the card down. Running it at 1/1 at those speeds is potentially harmful to the card and will most likely void the warranty. Depends on how dangerously you want to live.

    Just like CPUs, just because one person got their card to run at a given speed, doesn't mean you will.

    A life? Where can I download that?
    Where am I going? -- And why am I in this handbasket?

  3. #3
    Join Date
    Jun 1999
    Atlanta, GA
    Don't know about CL, but Diamond V770 is rated for AGP 4X, which is 132MHZ... So if the card is supposed to handle AGP 4x, anything below 132 MHZ should not be a problem.. I run my V550 (TNT) at 75 with no problems...
    "If it works it's not overclocked!"
    My Stuff

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts