$500 spend to spend on a gaming PC, what are your recommendations?
I have a budget of $500 to spend to make a new gaming PC. I need your recommendations as to what motherboard, ram, harddrive, video card, case, and cpu? I really like the Athlon 64 with the Nforce4 combo. Your recommendations are appreciated.
SRock 939Dual-SATA2 Rev 1.05 OCW Beta 2
Opteron 165 Denmark at 300*9 @ 1.55 volt
Memory clock 133
NB - 800
SB - 800
1 GB Samsung DDR400 2.5-3-3-7 1T
Nvidia FX5900 core 445 memory 891
Dual fan Aerocool GT-1000 idle 34 C / full 52 C
Antec 350 Watt X 2
RAID 0 - 2 * 80 GIG WD 7200 RPM
MAXTOR 7200 RPM 80 GIG
SEAGATE 7200 RPM 80 GIG
Plextor 708A
Plextor 716A
Win XP Pro SP2
well, your cpu, video card and ram will be the deciding factors on how well your games play. problem is, those three alone will cost $500 at least, so you might be pushing it there. I think youll be able to put something much better together is you save another $200-$300, but maybe someone here will figure out something for you, it seems to be a fun game here. try riggin something up on newegg, you can put everything in your cart then just cancel when you have an esitmate
Thanks Falcon, I will go with your recommendations. My nephew gave me 500 bucks but I am having to spend another 100 bucks to put it together for him and install all the software. What a deal he is getting. My nephew can add more RAM when he has the dough.
Last edited by HOANGPHU; July 24th, 2005 at 10:39 PM.
SRock 939Dual-SATA2 Rev 1.05 OCW Beta 2
Opteron 165 Denmark at 300*9 @ 1.55 volt
Memory clock 133
NB - 800
SB - 800
1 GB Samsung DDR400 2.5-3-3-7 1T
Nvidia FX5900 core 445 memory 891
Dual fan Aerocool GT-1000 idle 34 C / full 52 C
Antec 350 Watt X 2
RAID 0 - 2 * 80 GIG WD 7200 RPM
MAXTOR 7200 RPM 80 GIG
SEAGATE 7200 RPM 80 GIG
Plextor 708A
Plextor 716A
Win XP Pro SP2
Just remembered, Antec site doesnt say if PSU is equiped with 24-pin ATX connector or not, so its possible you will need a 20pin to 24 pin ATX adapter (now there is also a way to connect it directly:click, but its better to use the adapter).
Its also a good idea to connect the 4 pin power plug into the 4 pin power connector on the mobo, even if manual says its not necessary.
Falcon, would you please explain or direct me to the right place to read about the difference between the 20 pin and 24 pin ATX power connector. I am reading the MSI manual I downloaded and they say I can plug the 20 pin into the 24 pin but what about the last 4 unused pin? What are they for? Lastly, if you are refering to the 4 pin connector when 1st released were for the P4 boards but the AMD board eventually adapted this extra power connector -- I always plug it in just for extra juice should the board need it. Man I fall a sleep for a few months on computer stuff and all this new stuff creeps up on me. Thanks for your knowledgeable input.
SRock 939Dual-SATA2 Rev 1.05 OCW Beta 2
Opteron 165 Denmark at 300*9 @ 1.55 volt
Memory clock 133
NB - 800
SB - 800
1 GB Samsung DDR400 2.5-3-3-7 1T
Nvidia FX5900 core 445 memory 891
Dual fan Aerocool GT-1000 idle 34 C / full 52 C
Antec 350 Watt X 2
RAID 0 - 2 * 80 GIG WD 7200 RPM
MAXTOR 7200 RPM 80 GIG
SEAGATE 7200 RPM 80 GIG
Plextor 708A
Plextor 716A
Win XP Pro SP2
No problemo, just get the 20 pin to 24 pin ATX adapter, shouldnt be more then $5.
Now if you choose to use 20 pin as the above linked to picture suggests, supposedly its fine as well and yes in that case leave the rest of the 4 pins on the ATX24 connector open. I would go for the adapter though, local Radio Shack should have one.
In any case plug in the 4 pin power connector (P4 stuff you mnetioned) into its 4 pin plug on the motherboard.
BTW this 20 pin to 24 pin problem was going to haunt you anyway since quality PSUs with 24 pin ATX plug usually start at $65 and of course thats without the case. And its always better to get quality stuff from Antec with 20 pin plug, then some no-name PSU with 24 pin plug.
Last edited by F_A_L_C_O_N; July 26th, 2005 at 05:25 AM.
Reply With Quote
Bookmarks