June 30th, 2005, 02:10 PM
How could i reduce the sensitivity in my car alarm?
it has a small microphone that "listens" for the break sound if someone breaks the window glass.
but sometimes my dog barks and it activates the alarm... how could i reduce the sensitivity?
Should i cover the microphone with a specific material or something?
and by the way: the alarm has no control for that, only for the movement sensor not for the microphone
June 30th, 2005, 02:50 PM
If there's no way to adjust the sensitivity of the microphone, I'd cover it with a piece of selotape. I'm guessing it would still be triggered by loud noises, such as breaking windows.
I guess it's no real loss if it wasn't triggered by sound as you still have the moment sensors - if someone steals something lying on your backseat, the alarm may or may not go off, but the thieves will still get what they want. If they try to steal the car, the movement sensors will be triggered anyway.
June 30th, 2005, 05:31 PM
Make and model of the alarm would be helpful. I've installed hundreds of car alarms and seen the frazzled people that result from mis-adjusted sensors.
Every alarm I ever installed, from high end Cliffords and Vipers to cheesy no-name brands, all sensors had adjustments somewhere. I know you say yours doesn't - if thats true, then you probably need to junk it anyway.
The end result, however, is that sensors and sirens really mostly end up being useless. If a thief busts out your window and grabs your *(name valuable item here)* do you really think that a siren and blinking tailights will make them put it back?
Most of the higher end cars we did, were mostly anti-theft (of the vehicle), anti-carjack, and extra remote-controlled features, like window and lock controls, remote engine start, and things like that. Sensors and such are 99% annoyance.
July 1st, 2005, 11:22 AM
I am not sure, the company where i installed it says it's brand "lockar", but i dont know, in the booklet it says nothing about "lockar".
I guess is a no brand alarm.
in the booklet says sensor meter (which control only for hits and movements) NOT FOR THE MICROPHONE I wonder, I thought in covering that microphone with masking tape, but i would like to read suggestions.
July 9th, 2005, 12:42 PM
It looks like covering the microphone with masking tape has not fixed my problem, my dog still barks and sometimes it gets activated because of his bark.
I DO NOT want to take out the microphone, but i DO NOT want to have my alarm activated for every simple sound.
what else could I do? (seriously)
July 10th, 2005, 02:50 PM
OK, not serious but maybe you need to cover the dog's mouth with the masking tape instead
Originally Posted by YankeeMan
CPU: Athlon X2 7850 Blackbox edition o/c'd to 3400mhz
Motherboard: Asus M2N68-AM SE2
Memory: 4gb Kingston KVR RAM
Video: BFG Geforce gtx 260 oc v2
Hard Drives: 1TB Barracuda 7200.12, 500GB WD, 320GB WD, 320GB WD 250GB WD, 250GB Seagate
Case: APEVIA X-CRUISER-BK Black Steel case
Power Supply: OCZ 700W StealthXStream Power Supply
Optical: 22x LG DVD R/W
July 10th, 2005, 09:45 PM
A dap of silicone would work better than tape ,but it may not be able to be removed as easy if you change your mind.
July 9th, 2005, 03:00 PM
instead of tape, which doesnt absorb much sound, i would try rolling a sock or some other cloth over the mic a few layers. eventually, you will get the mic to loose sensitivity.
As for a more presice solution, maybe a resistor in-line would work. seeing as i couldnt tell you what one to get, go with an adjustable potentiometer. I really dont know what size you would need, maybe start with a 10k, im sure that will have enough resistance to stop the mic, and you can adjust it down to almost no resistance....
July 11th, 2005, 12:40 AM
i think the mic may be picking up vibrations through the chassis, as tape doesnt seem to help. maybe mounting it differently would help, like use foam washers on the mounts or something....
July 25th, 2005, 06:40 PM
what could you suggest me to mount that foam ??? because it's driving me crazy.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)