GeForce 256 DDR AGP vs Geforce 4 MX420 PCI
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 2 of 2

Thread: GeForce 256 DDR AGP vs Geforce 4 MX420 PCI

  1. #1
    Join Date
    May 2000
    Kingston, England

    GeForce 256 DDR AGP vs Geforce 4 MX420 PCI

    Creative Blaster GeForce 256 DDR 32mb AGP 4x
    PNY Geforce4 MX420 64mb PCI

    I have these two cards and as I only have one monitor here in uni I decided to take one out of my system to reduce temps and extend life of a card.

    I tested using 3dMark01 SE at 1024x768 on an Athlon Barton 2500+ @ 3000+ (10.5x200) , Asus A78NX-X with 512mb PC3200 CAS2.5, Det 53 drivers

    Geforce 256 DDR (AGP 4x):
    Default (120/300 ): 3564
    140/340 : 4110
    150/350 : 4287
    160/360 : 4492

    Geforce 4 MX420:
    Default (250/338 ): 3515
    275/400 : 3818

    I stopped testing the GF4 at this point as it was clear that it would not be able to catch the AGP card, being limited by the bandwidth of the PCI bus.
    The only test where the GF4 was significantly better was the High Polygon Count tests, especially with 8 lights. Presumably this is due to the better T&L on the GF4 core.

    The first test I ran on the default GF256 I got 2588 - thought this was a little low, so went to update drivers.. "Error: Your drivers are not compatible with Windows XP and the default drivers are being used" even though they were Det52s! So just using the nVidia drivers boosted me nearly 1000 and the overclock gave me nearly another 1000. Not bad for a graphics card going on 6 generations old :P

    The moral of the story is that PCI cards never have enough bandwidth to be able to take on even an inferior AGP card.

  2. #2
    Join Date
    Apr 2000

    Re: GeForce 256 DDR AGP vs Geforce 4 MX420 PCI

    Interesting comparison, but bear in mind that the GF256 DDR isn't exactly "inferior" to the MX420. It has twice the memory bandwidth and single-textured pixel fillrate per clock.

    The reason the MX420 wins the high poly test is probably because it's a geometry-limited situation. AFAIK, its T&L engine isn't any better than that of the GF256, so it's probably just clockspeed that's making the difference.


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts