October 20th, 2002, 05:00 AM
Essential Case Modding Tools
I need to know some essential modding tools. I am aware of the dremel tool, what other tools are useful?
AMD Athlon 1.4 Ghz CPU
Memorex DVD+R/RW 2.4X/CDRW 12x10X32 yahh!!!!
60 GB Maxtor 7200 RPM HDD
AD70-SC DDR Mainboard
256 DDR PC-2100
GeForce 2 32mb Vid. Card
need to upgrade)
Lite-On 56X CD-ROM
October 20th, 2002, 07:02 AM
Good tin snips and file should handle most types of odd shaped cuts.
"I know nothing."
October 20th, 2002, 09:10 AM
I wouldn't say they are essential but I'd imagine 80 and 120mm hole saws are very useful.
Opteron email@example.comGHz (stock HS/fan), Asus A8N-SLI SE (passive NB), 1.5GB RAM (2:3:2:5, 2T), WD Raptor 740GD 74GB, Maxtor DM10 300GB, Asus EN7600GT SILENT@???, M-Audio Revo 7.1, Nebula DigiTV, Dell 2005FPW, Enermax 431W Active.
October 20th, 2002, 10:13 AM
My basic tools are a round and flat file, a jig saw with a fine metal cutting blade, a drill with bits ranging from about 1/8" to 1/2", sand paper, zip-ties, and electrical tape. Maybe some screw drivers, wire cutter, tin snips, and needle-nose pliers. The drill and jiz-saw are the only big ones and they can be had for about $20 for basic ones. Most of the other tools are $5 or less. Everything can be baught at a local hardwar or home improvement store easily.
It is also nice to have a few extra fans and heatsinks laying around. Some of the older Pentium Pro heatsinks are great for hacking up into smaller custome heatsinks for RAM sinks. You can find them cheap (used likely) at most local computer stores. I picked up a nice bundle of about 10 for $2 and have usede them on many of my cooling projects. Arctic Silver II (or better) and Super Glue is nice to for attaching the RAM sinks. Wire (and a soddering iron if you want) is also nice for lengthening (or shortening) wires to route them better. Scrap 12g aluminumj sheets are handy too for making brackets and stuff. Lighted magnifying glass is nice if you want to do very fine detailed work. Some fan grills and lots of screws and small bolts and nuts also helps.
Masking tape, old news papers, fine sand papers, rags, and some automotiveprimer and paint is also handy if you want to change the paint sceme on you case.
A nice anti-static mat or grounded wrist stap might also be nice if you assemble a lot of computers. Static electricity can be a bad thing for computers.
AMD Phenom II x4 945 3Ghz | ASUS M4A77TD | 2X WD 1TB SATA 2 hard drive | 2x2GB Corsair XMS3 | nVidia GeForce 8800 GTS | ATI TV Wonder Theater Pro 550 | Antec P-160 case | Antec 650w Earth Watts | LG Blu-ray Super Drive | LG DVD RW | Windows 7 Pro
October 20th, 2002, 08:55 PM
Careful with that jiz-saw........................
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)