TV tuner
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 4 of 4

Thread: TV tuner

  1. #1
    Join Date
    Apr 2002
    Location
    San Diego, CA
    Posts
    480

    TV tuner

    I have a ATI all in wonder. I don't get any TV signal out of it though. I heard someone say that it was probably because i had a cheap cable connected into it but it isn't just a few feet that is of the cheap cable we ran a cable through the garage to add a cable line in this room. That was about the same quality would we have to replace all of that then...
    ASUS A7V333 ATHLON XP 1800+ @ 1533
    VOLCANO 7+
    ATI Radeon 8500LE 128
    16X Pioneer DVD (slot)
    12x10x32 CD-RW Plextor
    512MB PC2700 Samsung DDR SDRAM
    SBLive! Value
    Windows XP Pro

  2. #2
    Join Date
    Apr 2000
    Location
    Morelia, Mexico
    Posts
    1,717
    you sure you set the proper settings?

    like NTSC and Cable TV? (and not antenna and PAL)
    If you were in a world full of crazy people, who would be the crazy person?
    OTCentral

  3. #3
    Join Date
    Apr 2002
    Location
    San Diego, CA
    Posts
    480
    I tried all the settings and i basically just gave up and put it in my brothers computer since i didn't want to go buy him a new one and i thought about it then unplugged the cable from the modem and i was getting TV signals fine
    ASUS A7V333 ATHLON XP 1800+ @ 1533
    VOLCANO 7+
    ATI Radeon 8500LE 128
    16X Pioneer DVD (slot)
    12x10x32 CD-RW Plextor
    512MB PC2700 Samsung DDR SDRAM
    SBLive! Value
    Windows XP Pro

  4. #4
    Join Date
    Jun 2002
    Location
    PA
    Posts
    1,193
    If you get nothing through it at all, then this will not help. If you get green lines and the picture is distorted, ATI released this info about problems in XP and the MMC (does your brother use XP as well?):

    http://mirror.ati.com/support/infobase/3940.html

    or

    http://mirror.ati.com/support/infobase/3987.html

    or

    http://mirror.ati.com/support/infobase/3263.html

    Hope one of them helps.
    Current System
    - Antec Nine Hundred
    - Q6600 G0 Stepping @ 3.0GHz
    - Gigabyte GA-P35-DQ6
    - Corsair XMS2 (4x1GB) PC2-8500
    - eVGA SuperClocked GeForce GTX 560 Ti
    - PC P&C Silencer 750 Quad
    - Enhance Technology Quadrapack Q14SS
    - HP Smart Array P400 SAS/SATA Controller w/ 512MB BBWC
    - 4 x 72g 15,000rpm 2.5inch SAS Drives @ RAID5
    - 2 x 750g 7,200rpm 3.5inch SATA Drives @ RAID1
    - 2 x LG DVDR Burners
    - HannsG HH-281HPB 28" Display
    - Windows 7 Ultimate 64-bit w/ SP1

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •