June 30th, 2002, 09:16 PM
People with Antec/Chieftec cases (Chenming-style)...
I'm pretty sure that I'll be ordering a Cooler Master ATC-710 soon. My current case (which is falling apart) will form the basis of a server box I am going to build for DSL routing/a DC Hub next year at uni.
It's pretty lush looking case, based on the very popular Chenming design which I believe a lot of Antec/Cheiftech cases use. I have a 120mm x 120mm WC radiator and would like to know whether I can get it in underneath the disk drive bays at the front of the case. I don't mind modding slightly if necessary.
I know quite a few of you guys use these awesome cases so could someone please take a look and give me their opinion? What's the largest square-shaped object you could fit under there?! If the space is something like 11cm high then that'd probably be enough after taking a dremel to the radiator housing.
Last edited by MuFu; June 30th, 2002 at 09:19 PM.
Opteron firstname.lastname@example.orgGHz (stock HS/fan), Asus A8N-SLI SE (passive NB), 1.5GB RAM (2:3:2:5, 2T), WD Raptor 740GD 74GB, Maxtor DM10 300GB, Asus EN7600GT SILENT@???, M-Audio Revo 7.1, Nebula DigiTV, Dell 2005FPW, Enermax 431W Active.
July 1st, 2002, 12:08 AM
I think you are using too large of a hammer when working on your PC.
Looks nice. This isn't going to be your primary machine?
July 1st, 2002, 08:16 AM
Yes, it it going to be my primary machine. I'm going to scrape together some bits for a Linux box for next year at uni and I'll use my old case. Funnily enough I have taken a hammer to it a couple of times. Because of the WC stuff it also bends pretty scarily when you pick it up. Can't have that!
Anybody with one of these style cases? Pleeeeease?!!
Last edited by MuFu; July 1st, 2002 at 08:18 AM.
July 1st, 2002, 09:34 AM
Height clearance directly underneath the drive bay with the drive rail holders removed is not more than 100mm...
"I know nothing."
July 1st, 2002, 11:36 AM
Hmm, ok. Thanks Shinma.
Damn, that's a bit annoying. Going to have to rethink things slightly. If I can get away with running 2 HDDs and an FDD in one of the bays and remove the other I might do that. I should only have one hard drive soon anyway because my 75GXP will die soon, I'm sure of it.
July 1st, 2002, 02:56 PM
You're welcome Mutha Funker.
Enjoy the new chassis.
"I know nothing."
July 1st, 2002, 03:12 PM
I got the Gun-Metal grey one as seen in those pics. It's also available in Silver. I'll let people know how it goes since this is a very new product.
July 1st, 2002, 07:08 PM
Try to lay off using the hammer this time.
July 2nd, 2002, 12:11 AM
That thing looks like a Sub Zero!!!
Athlon XP 2800+ Barton
Gigabyte GA-7N400Pro A nF2 Ultra400
1 GB Corsair XMS Extreme PC3200
Coolermaster Aero 7+
ATI Radeon 9800 128MB Non-Pro
512MB Mushkin DDR-333
ATI Radeon 8500AIW
Windows XP Pro
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)