crashing help

[tRaptor]

ok guys'got a question. My kt7a is at 115 fsb currently (750 duron = 863) but if i try to goto 116 it crashes, usually durring windows boot, iver tried increasing/decreasing volts but its still crashing, could it be my ram? its PC 100, 192 mb of it, or is it casue its jsut getting to hot?

[Wuzup101]

It could be the ram but it's most likely just because the chipset can't take it. Most people dont get their kt133 chipsets over 115ish....that's as far as I ever got my asus A7v.

------------------
AMD Tbird (AXIA) 1Ghz @ 1425mhz w/ OCZ gladiator
Iwill KK266 Raid
384megs crucial cas2 @ 150mhz
Leadtek 32meg Geforce2 GTS Pro (220/415)
Dual 20gig IBM 60gxp Deskstars in RAID 0
Nec 40x cdrom
Sony 12x8x32 CD-RW
17" KDS Avitron flat screan (1024x768 @ 85hz)

[600R]

He's using a KT133A so I would think that 116 should be no problem. What sort of crashes are you getting? It would either suggest that the ram can handle it, or that the cpu doesnt like that high a speed....

------------------
Duron 700@1100 2.1v Air Cooled
ALPHA PAL6035 & Delta 7000rpm
Abit KT7 Raid w/voltage mod
IBM 75 GXP UDMA100
Gainward Geforce2 Pro 64Meg
256Mb Crucial PC133 CAS2
Belinea 10-30-40 17" 0.26
Turtle Beach Santa Cruz S/Card
ASUS 50x
Mitsumi 8x 2x CD-R
GlobalWin 802 w/5x80mm YS-Techs

[cmx3]

Maybe your PCI devices or hard drives can't take the overclock..

[tRaptor]

it starts booting windows and jsut freezes on teh windows screen

[tRaptor]

ok so i bought 128 of PC 133 today, will boot at 116 and i make it to windows but it dosent really stand much of a chance of surving, it ends up crashing.........

[tRaptor]

do u think im overheating ormy video card is just not taking the spped, could be it casue i use 3dmark to test, must run cpu intensive program only tomorrow