------------------
Where's the any key?
______
T-Bird .7 ghz @.9 ghz | Global Win fop-38 | Asus A7V rev 1.04
256 pc-133 ram (no Name Brand) | Hercules 3D Prophet II GTS Pro | 400W AMD Aproved PSU
A64 3400+ @2.5g 220fsb | asus K8V | 1gig Mushkin Level1 PC3500 | Radeon 9700 Pro
------------------
Where's the any key?
______
T-Bird .7 ghz @.9 ghz | Global Win fop-38 | Asus A7V rev 1.04
256 pc-133 ram (no Name Brand) | Hercules 3D Prophet II GTS Pro | 400W AMD Aproved PSU
[This message has been edited by Maxout (edited 04-11-2001).]
A64 3400+ @2.5g 220fsb | asus K8V | 1gig Mushkin Level1 PC3500 | Radeon 9700 Pro
Apparently, it is a complete arse to fit, and fits only a few cases/mobos.
------------------
AMD Duron 800@1000 (7.5x133MHz)
128Mb 133MHz RAM
Abit KT7a RAID
2x 8.4GB in RAID 0
Elsa GeForce2MX 32Mb SDR
------------------
"This is not the end. It is not even the beginning of the end. But it is, perhaps, the end of the beginning."
Main PC: A64 3200+ | 1024MB Kingston RAM (Dual Channel) | WD 160GB | Seagate SATA 160GB w/NCQ | Asus A8N-SLi Deluxe | Connect3D ATi X800XL Pci-E | Coolermaster ATC-710 case | Antec NeoPower 480w PSU | Toshiba 27wl46 27" TFT
looks pretty flimsy to me, like I could bend those blades if I wan't careful
Yeah I suppose! Kinda like your ram or HS. Don't want to get too "rammy" with them either. Heah, if it cools like they say it does then sounds good to me and if I do accidentally bend some of the blades I guess I am going to have to simply bend them back. Thin is better. Why do you think the blades on radiators, house water heating units and heater cores are thin. Because they are better at dissapating heat. I think this thin idea is a great idea. It is just too hard to make regular heatsinks like this. I see how they did it though. They sandwiched all the copper pieces together with allen bolts. Good Idea though I am wondering how they got the heat to travel good through them all. Maybe they soldered them together with Ag solder in a press first which I would do. then it would work great. Image if you hooked the 80mm fan they have up to a vent hose sucking room temp at it. Much better in my experience.
Actually I think it would work quite well if it's used where passive heatsinks are needed. Couldn't think of a way on how to mount a fan to that and I've read about it being made of copper fins and aluminum base (or am I wrong) and isn't that suppose to be the other way around heatsinks are getting bigger, stronger, weirder FAST!
------------------
T-Bird 900@1076
KT7-RAID
256mb Crucial CAS 2
3d prophet 2 MX 220/195
IBM 75gxp 45gb
SB Live PLatinum 5.1
Cambridge SoundWorks DTT3500
DVD 12x
Athlon XP1600+ @2000+ Alpha PAL 8085 MSI K7T266 R126 512mb Crucial CAS 2.5 DDR
Gainward Geforce 2 Pro /450 GS 2 40Gb 60GXP's In RAID 0 Black Dell P791 SB Live PLatinum 5.1 Black GW 802
Reply With Quote
Bookmarks