I have a 1.2 gig Athlon in an Enlight Mid Tower (yes I know It should be in a tower) and the case and processor are getting little hotter than I like. I have a fan blowing in on the front of the case and an exhaust fan in the rear. The Processor runs about 58 degrees C at full load and the case temp is in the high 30's. When I remove the side panel, the processor temp falls to around 51 degrees. I am thinking about adding either a PCI slot turbine exhaust, or an 84 CFM fan to the 5.25 drive bay. Are either of these methods effective? Is there anything else I should be considering? Thanks in advance for your suggestions