LOL That takes me back. What you have there is the exact same mobo/proccy I had for my first AMD system. Anyways.....
If you would like to overclock, I'd reccomend you try using the 112Mhz bus setting, which will give you 336Mhz, probably faster than 350 due to the higher bus pushing your Graphics card/memory. You might not need any voltage change for this, but if you get crashes, you might want to try 2.3v or 2.4v. From personal experience i'd say you are safe up to 2.6 as long as you have adequate cooling. If the 112 setting wont let your computer post, i'd say try 3.5 multiplier with 100bus which would give you 350Mhz. Best way really is to try yourself!
Good Luck, 600R
Duron 700@1096 2.07v Air Cooled
ALPHA PAL6035 & Delta 7000rpm
Abit KT7 Raid w/voltage mod
IBM 75 GXP UDMA100
Hercules ProphetII GF2 MX 250/210
256Mb Crucial PC133 CAS2
Belinea 10-30-40 17" 0.26
Turtle Beach Santa Cruz S/Card
Mitsumi 8x 2x CD-R
GlobalWin 802 w/5x80mm YS-Techs
Duron 700@1100 2.1v Air Cooled - RIP