cooling !!
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 7 of 7

Thread: cooling !!

  1. #1
    Join Date
    Nov 2000
    Location
    Newcastle, England
    Posts
    17

    cooling !!

    Can anyone tell me if the blorb will fit on the voodoo3 3000 agp grapics as i am pushing it rather hard (fsb 129mhz)and i have heard they are great for tnt2 cards. also will someone settle this arguement once and for all .............

    what is THE best cooler for say a p3 700e running at 903mhz@1.75v as the nominal temp is around 32 degrees and loaded is 39-41 is degrees and i would like this lowered if possible. i dont want to use peltier or water or pumps or central heating systems if possible !!!!!!!!!!!! so what is the best stand alone heatsink ????

    thanks in advance

    eldavido
    t-bird 1.2 @ 1.3 (108x12) with thermoengine
    abit kt7a raid
    hercules geforce2 mx @ 185/195
    sblive value
    256 meg cas3 generic ram
    45 gig western digital ata66

  2. #2
    Join Date
    Apr 2000
    Location
    USA
    Posts
    2,635
    The best cooler for the PIII is the Alpha 3125. Hands down.



    Assuming Slot 1.
    ------------------
    -=S_Klass=- I tweak... therefore I am.

    [This message has been edited by S_Klass (edited 11-18-2000).]
    -=S_Klass=- I tweak... therefore I am.

    Proud Member of the OCN Hellspawns Genome Fleet
    TeamID: 567443298
    OCN Genome FAQ | OCN Genome Stats

  3. #3
    Join Date
    Nov 2000
    Location
    Newcastle, England
    Posts
    17
    Damn !! should've mentioned my specs

    Abit BE6-2 v1.2 (i think)
    p3 700e fc-pga @ 903@1.75v@129X7 fsb
    128mb msc vertriebs ram (sucks i know - working on it)
    voodoo 3 3000 agp
    sb live
    45 gig western digital ata66 drive
    48x sony cd
    8x4x32 acer cd-rw

    sorry for the lack of detail in my earlier posts - hope this helps

    ta
    t-bird 1.2 @ 1.3 (108x12) with thermoengine
    abit kt7a raid
    hercules geforce2 mx @ 185/195
    sblive value
    256 meg cas3 generic ram
    45 gig western digital ata66

  4. #4
    Join Date
    Dec 1999
    Location
    Stockholm, Sweden
    Posts
    1,255
    Or get the Alpha PEP66:




    A fan is mounted on the hole on the heatsink.

    ------------------
    Visit http://pub24.ezboard.com/bultrabytecomputingforum

    Never mind the dog, beware of the owner.

    HWC FORCE3D ICQ AL= 57497564
    OCN ICQ AL= 67864797
    HWC FORCE3D ICQ AL= 57497564
    OCN ICQ AL= 67864797

  5. #5
    Join Date
    Oct 2000
    Location
    There and Back Again
    Posts
    380
    I have the Aplha PAL35T, which isn't bad at all..

    The temps of my P3800@1.06GHz:



    As you can see it works fine (this is without a TEC or watercooling)

    ------------------
    The world is the cradle of mankind, but man can't stay in the cradle forever - Konstantin Tsiolkovski

  6. #6
    Join Date
    Nov 2000
    Location
    Newcastle, England
    Posts
    17
    thanks shadowfax - finally a sensible answer.

    P.s. any ideas about the mod to the 66 that is suposed to make it better again

    ta
    t-bird 1.2 @ 1.3 (108x12) with thermoengine
    abit kt7a raid
    hercules geforce2 mx @ 185/195
    sblive value
    256 meg cas3 generic ram
    45 gig western digital ata66

  7. #7
    Join Date
    Jan 2000
    Location
    England
    Posts
    733
    The cooler S_Klass post a pic of can be modded to fit onto some slockets.
    http://www.ocshoot.com/modalpha.htm

    There is also a solid copper Socket heatsink available in the UK called hedgehog (or something like that) ,but is rather pricey.
    Athlon 1Ghz AXIA Stepping
    Abit KT7a Rev1
    256mb generic
    CL GTS 32ddr
    Vortex 2 (2048)
    GXP60 20Gbytes

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •