Help: OC'd CPU reverts to rated speed
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 3 of 3

Thread: Help: OC'd CPU reverts to rated speed

  1. #1
    Join Date
    Sep 2000
    Ann Arbor, MI

    Help: OC'd CPU reverts to rated speed

    Greetings -

    Trying to OC a P3800(133). I've got a Peltier cooler on it (I have OC'd other computers before), so I don't expect heat to be a problem. First attempt was to go to 933(133). When I got out of CMOS setup, the POST reported the CPU as 800/133. Speed Error Hold was disabled, so the computer went ahead and booted up like this.

    Any setting above the rated 800/133 results in being reset back to 800/133. Again, no speed error hold problem here.

    Motherboard is Abit VH6. I've tried using both the 933/133 preset, and the user specified settings (still 933/133); same results as before.

    How can I get the CPU to accept and boot at any setting higher than the rated 800/133?

    Thanks for any help.



  2. #2
    Join Date
    Oct 1999
    fancy pants, what else?
    if it is an 800B (i.e. 133 bus is stardard setting) then you're not going to get very far. are you trying to bump the FSB or change the multiplier? the latter is not possible... no matter what you set it to in softmenu, it will force the locked 8x multiplier.

    ezekiel 25:17

  3. #3
    Join Date
    Nov 1999
    Santa Clara, CA / Baltimore, MD USA
    you need to up the front side bus speed before you can overclock your cpu. all intel cpus nowdays have a locked multiplier.

    Visit my website!
    look for me on AIM as gosanjose or on ICQ as #46997155

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts