Duron bridge connection generator... check it out!

[AMDnut]

I found this link at AMDZone....... just pick your voltage and speed and it shows you the bridge configuration! Cool!

Here it is: http://www.ocinside.de/index_e.html?...resistors.html

[fallguy]

Cool AMDNut,
but thankfully my A7V has the multiplier settings in the manual, and the Vcore controlled from the BIOS.
Cheers,
Fallguy

[AMDnut]

Yeah, I know a lot of people have the ability on the mobo's, but I thought it might be helpful for those that don't!

[fallguy]

Yeah,
must engage brain sooner.....
That'd be quite something, the ability to OC on a cheapo motherboard (Jetway springs to mind!), but to be honest, having used an Asus, I wouldn't touch any other make unless I really had to - the performance is just phenomenal, even for an Athlon. Combined with AGP Pro, and UDMA 100 support, it's definately worth the extra 50 quid or so.
It even just about edges out my beloved GA-5AX motherboard (although only just!) as my favourite motherboard....
Cheers,
Fallguy

[jml]

AMD, Much Thanks for the link. For someone who has a 650 Duron on an AZ11, it provides a path to better performance. From your experience, how would you cut the bridges?
Cheers,
Joe

[This message has been edited by jml (edited 09-17-2000).]

[AMDnut]

Can't really help you from "experience" because I haven't cut any yet. But from what I read, a razor blade or exacto knife/blade works good. Sorry I can't help more...........