FOP32 + Peltier
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 2 of 2

Thread: FOP32 + Peltier

  1. #1
    Join Date
    Sep 1999
    Location
    Sweden
    Posts
    349

    FOP32 + Peltier

    Will this work or not?
    Come to Demons Layer:

    www.geocities.com/acidruler
    Let me show u how to crank a 400A to infinity

  2. #2
    Join Date
    Jul 2000
    Location
    UK
    Posts
    493
    All depends upon what you want out of it.
    yes I have ran a FKP32 + 52W TEC, and they did a very good job.
    The FOP is big , but I would think you would pushing its limit with a 72W TEC.
    All depneds upon what sort of temps you hope to achieve, and the output of your CPU ( in Watts).
    You will need to lap the suraface of the FOP< Globalwins finnishing is very coarse, and maybe use a copper spreading plate, as well as a copper cold plate.
    IMO you should be OK, so long as your very careful about watching Temps' and use a good thermal compound. There seems to be little point in the use of a single 52W tec with the newer CPU's ( ie over 600mhz ), but would not recomend going anything higher then a 72W.
    If you do try it, let us know your results
    My PC has an attitude problem, alright!...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •