Which component denies me 150 FSB?

[Nuts4GTS]

Which component is hanging? FSB @ 150, AGP @ 75, PCI @ 37.5. I thought it was RAM, but not sure. Tested @ Cas2, turbo & Cas3 turbo and normal. Posts at 750, but hangs when Windows starts to load. any suggestions?

------------------
Apex MidTower w/250W P/S, Tyan Trinity 400, Rev. 4, BIOS 1.07, FC-PGA 500E @ 700(5 X 140 @ 1.7V),MS 6905 Rev. 2 Master Slocket, Global Win FKP-32, Micron 128MB PC100 Cas2 SDRAM, Xentor32 TNT2U @169/185,
15.3GB DiamondMax Plus 40, ATA66, 7200rpm HDD, SBLive! Value, FPS-1000, 56K/V90 USR Winmodem, KDS AV-7T 17", Windows '98FE

[Ruffian]

Hey Nut, I think it might be the Winmodem. Either that, or your PC100 memory can't take the fsb. I know its not at 150, you told me you did that -33 thingy in the bios.

Try taking out the modem and see if that works. If it does, then get a new modem winmodems arent that good anyway.

------------------
I am a man that accecpts what I see because I know I will soon wakeup - The Matrix

[This message has been edited by Ruffian (edited 08-11-2000).]

[Ruffian]

Oh, also it might be heat or you might not have a high enough voltage.

------------------
I am a man that accecpts what I see because I know I will soon wakeup - The Matrix

[Quigs]

Do the basics. tear down your system to bare essentails to run if that works, add one component at a time to find the culprit. and set memeory to 3-3-3 if not all ready done running at 150 fsb is pushing the envelope on any system. good luck and post what the problem was!!!!

[Big Lar]

Try running your mem at cas 3,2,2.. see if that helps

------------------
Help me get this Boot outta my azz!!!!