It took me about 2hours to finally purchase an oem celermine 566 and an abit vh6 mobo for about $200, $214 with shipping total.....whew!!! Well my question is, has anyone successfuly overclock a oem celermine cpu to 850mhz and over?
Oh yeah, if anyone of you guys are looking for an upgrade, then here's the link where i bought the cpu and mobo (these prices include shipping):
SL46T OEM 566E , PEP66 + 52W TEC.
@952mhz with 1.75v
Temps idle -2c max 22c with looping demo.
I thinks core is at its limit @952
and without TEC would do 935mhz but would require 1.85v and get to 50c+ ;(
HSF just hits that temp now
Going for retail 600 next, may be able to push a little bit extra out of it
CEL 600 @ 900 @ 1.7v ON ABIT VH6
ONLY PROB I CAN SEE IS SAME AS ME TOP VOLTAGE IS 1.7 (COULD USE UPTO 1.8-1.9)
PLUS THE FSB SETTINGS ARE ONLY 66-75-83-100
75 IS TO LOW BUT WORKS GREAT
83 IS **** PCI/AGP CLOCKS OUT OF SPEC
100 IS GOOD BUT REQUIRES MORE THAN 1.7
BOY DO WE NEED A 90 OR PLUS 1`S
What do you mean it only has fsb of
66-75-83-100 doesn't it go all the way up to 133fsb? And about the voltage settings, did you flash the bios or is it just stuck at 1.7v no matter what? My mobo should come on Friday:^)