July 25th, 2000, 07:03 PM
Award Bios Parameters???????
Sorry a bit OT but what I want is a complete list of ALL possible Bios flash "additional" parameters, what they mean, and what they do,
There must be a list on some site but I've spent an hour searching without results yet,
eg: if I flashed this:- AWDFLASH BH6_GY.BIN /PY /SN /CC /CD
CC = Clear CMOS
CD = Clear DMI data
but what do the others mean and do, and how many are there? anyone help please.
[This message has been edited by BladeRunner (edited 07-25-2000).]
July 25th, 2000, 07:39 PM
there's even more...
AWDFLASH.EXE /py /sn /cd /cp /cc
but sorry i know as much as you do...
Fast, Faster, WooHoO!!!
July 26th, 2000, 02:37 AM
Check your motherboard post. http://ic.doma.kiev.ua/inside/award/eflash.htm
[This message has been edited by Axe (edited 07-26-2000).]
July 26th, 2000, 04:37 AM
Thanks for that Axe
July 26th, 2000, 03:04 PM
Thanks for that Input Axe and I have solved a bios problem with my Abit BE6 r2.
When I booted from a shut down state the PC would boot OK but if I restart or use the reset switch at all it would boot up show video info then give this:-
Award Bios Boot Block
Bios Rom Checksum Error
Detecting Foppy Drive A media
and it would just do nothing. If I then switched off and straight on again it would boot up fine.
I had a feeling the Checksum had got it's nickers in a twist because newer bios flashing didn't solve the problem.
It appears to work fine now after flashing with these parameters:-
ABITFAE BEH_SH.BIN /CC /CD /CP /LD /CKS
A great help as that boot fault was getting tiresome.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)