July 19th, 2000, 11:34 PM
interesting CeleryII 566 at 1ghz.. tweaks..
my celery 2-566 with a golden orb and abit BH6 rev 1.1 mobo can boot into windows at 118*8.5 (1001mhz) but freezes when accessing any 3d apps..
heat doesn't seem to be the issue either..
at 1.7 volts 113*8.5(960mhz) boots fine and i can run it for agaes with no probs.. but when i start mdk2 or 3D mark 2000 or any 3d game, it freezes..
at 105mhz bus (893mhz), everything is sweet.. (1.7 volts..) actually works fine at 1.65 volts also..
if i go up to 110mhz bus, it freezes in 3D games.. nothing else..!!
i can play all 2d games such as star craft or pharaoh for ages..!!
reckon it's my cideo card? not being able to handle the extra MHZ in the AGP bus..?
the CPU seems like a wonder but only rns 3D games at email@example.com volts..
heat doesn't seem like an issue..
thanks for any advice..!
P.S.. i've tried changing CAS latencies.. does nothing much.. my RAM has been working fine at up to 133mhz in another machine..! so it's not the RAM i think..
any BIOS tweaks i should try..??
July 20th, 2000, 12:25 AM
I say this to everyone who's oc'ed and says 3dmark (or other 3d stuff) is crashing, try bumping your voltage up 0.05 or 0.1, and see if that fixes the problem. It does on my celeron2. If it doesnt fix it, doesnt matter, at least u know its probably the video card or heat etc.
July 20th, 2000, 04:14 PM
If all is O.k except 3D I think Vid card is a prime suspect..
What kind of Vid card?
Try this stability test...
If it runs O.K. overnight then then your mb, RAM and CPU shd be O.K.
"If it works it's not overclocked!"
July 20th, 2000, 05:17 PM
more voltage like Utini said.
i don't think it the video card 118mhz bus is 78-79mhz AGP it's high but not exceptionally high. i suppose it depends on WHAT card you have? is older then a TNT2?
cel 566@900, Kyro and SDRAM GOOD. P3 1gig, GTS 64meg/V5 6k and RDRAM BAD.
[This message has been edited by drzaius (edited 07-20-2000).]
people that drive slow are easy to pass, it's people who drive fast that provide a challange.
July 20th, 2000, 05:40 PM
Seems the core of the 566e is maxing out at 103-105 mostly. Some will go higher, but not many. Mine will do 935mhz, astable and will not even try to post at anything else !.
How about upping your I/O voltage a little bit to help stability.
But I still think your doing fine at 892.
I just ordered a TEC to see if I can get to the majic ghz myself. Ill keep you informed.
My PC has an attitude problem, alright!...
July 20th, 2000, 08:18 PM
thanks for your replies guys..! ^^
yeah.. tried higher voltage but still same.. 100% runs fine with even 1.65 volts at 893mhz..! for hours without crash.. runs through 3D Mark 2000 fine also..
tried higher voltage also..
upto 2 volts @ 952mhz..!
only in 3d games it freezes..
so i think my old noname Savage4 is the culprit.. haha.. geez..
i'll buy a new vid card in a few months and i hope it runs better.. ^^p
golden orb rules..! so cool.. haha..
can you change the latency of the Celery2 cache?? i tried with a program yet failed..
July 20th, 2000, 08:51 PM
how do i increase the I/O voltage..?
coz i reckon that's a very good idea..
what do i need, is it difficult..
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)