Got a few questions......Just got a 566/850 Celeron on a IWILL slocket....the slocket is jumpered on auto detect and in the bios of my BE-6 I've set 8.5 @ 100mhz fsb ...it posts at 850 ( yippie !! ) but can only increase my voltage up to 1.7v before the same BE-6 had a 366/550 Celeron at 2.1v ....in Sisoft Sandra the "mainboard" info shows the FSB @ 190mhz and pci@ 48Mhz 1/4 and AGP @ 1/2 do I trust SiSoft's readings ??? Also do I set mt slocket any different to enable some higher voltage settings or just set it all manually on the slocket ???
[This message has been edited by ooops (edited 06-14-2000).]