Cel II 566 @ 850 /Sisoft Sandra ???
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 2 of 2

Thread: Cel II 566 @ 850 /Sisoft Sandra ???

  1. #1
    Join Date
    Jun 2000
    Location
    Carrollton,Texas USA
    Posts
    124

    Cel II 566 @ 850 /Sisoft Sandra ???

    Got a few questions......Just got a 566/850 Celeron on a IWILL slocket....the slocket is jumpered on auto detect and in the bios of my BE-6 I've set 8.5 @ 100mhz fsb ...it posts at 850 ( yippie !! ) but can only increase my voltage up to 1.7v before the same BE-6 had a 366/550 Celeron at 2.1v ....in Sisoft Sandra the "mainboard" info shows the FSB @ 190mhz and pci@ 48Mhz 1/4 and AGP @ 1/2 do I trust SiSoft's readings ??? Also do I set mt slocket any different to enable some higher voltage settings or just set it all manually on the slocket ???

    [This message has been edited by ooops (edited 06-14-2000).]

  2. #2
    Join Date
    May 2000
    Location
    Cincinnati, OH
    Posts
    87
    You have to set the voltage manually. I had to do this with my BH6 which only went to 1.7 volts. I am noy familiar with the Abit but the fsb reading has to be wrong. The others I believe are a feature of the Be-6 but am not certain.

    ------------------
    Cassis Extract = smell of cat piss
    Cassis Extract = smell of cat piss

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •