no You dont need a radiator as long as you dont mind frying your CPU. I would suggest going water and external radiator( you get alot of heat OUT of your case that way
If a chicken and a half can lay an egg and a half in a day and a half, how long will it take a monkey with a wooden leg to kick the seeds out of a cucumber?????
mbeach there was a really simple homemade desing on overclockers.com, all it was, they took a large floor model fan and made a coil from coper tubbing and layed the coil which was in a spiral pattern against the fan using ties to hold it to the grill of the fan and it worked pretty damn good, mabey someone can post a pic???
When all else fails have a beer and dont punch the drivebay covers...
Go to an Auto Parts store and ask for a transmission oil cooler. They usually have all sizes. I would reccomend one with at least 50 square inches (5x10) to cool sufficiently. You also might want to talk to #Rotor about getting a waterblock, as he makes them in all different shapes and sizes.
You also might want to talk to #Rotor about getting a waterblock, as he makes them in all different shapes and sizes.[/B]
Actually i would like to try the plastic waterblock... we have alot of that at work so it would be easier for me to make.
is a plastic block a waste of time or has anyone succeeded?
Hmmm... a transmission oil cooler, i wonder if they're cheap here in Sweden...
Any Swede who can help me out finding one?
Go to a scrapyard and go berserk in the cars there
you can find a lot of usefull radiators if you dont mind to work your way in to where they put the radiator for warming the air.
it is a litle work on most cars, but some Opel`s is easy as you can get to the radiator from the engine room.
------------------
There are those who think, and those who dream, But I, for one, refuse to choose between the two! Xriz`s Place
There are those who think, and those who dream, But I, for one, refuse to choose between the two! Xriz`s Place
yeah! I was just thinking of that option...
Hmmm... but a car radiator feels a little too big... I'll give the transmission oil cooler a shoot...
I changed a radiator on my previous car (Ford Escort) in about 15mins. On some cars it's even easier... Hmmm.. I wonder, what's on the parking lot this nice evening... Hmmm...
Get a heater core from a car..... they are great, just like Xriz said.
------------------
There are those who stink, and those who use deo, But I, for one, refuse to choose between the two!
(No offence Xriz =)
http://badsector.mainpage.net/
hmm a plastic waterblock? Hmm I don't that that would work all too well at all. A waterblock's purpose is to carry water through as much area as possible and in doing so conduct the heat away from the heat source. Unfortunately, plastic is a poor heat conductor therefore, I think you can drop that idea.
------------------
-=S_Klass=- I tweak... therefore I am.
What they actually do is, they epoxy a sqr plastic cap directly onto the CPU, the cap has an cavity in which the water can travel, getting it in direct contact with the cpu, that's all fine and dandy, but you had that idea by the OO when you said the word surface area ..... indeed yes, it is limited to the actual surface area of the cpu slug. which is relatively very small.
------------------
Go ahead...... lick my BLOCK
My page is here now.(Sorry for the popup banner there)
Reply With Quote
Bookmarks