May 29th, 2000, 05:04 AM
Please help for socket370 / Slot1 adapter settings
I have just bought a Soltek SL-02A++ adapter but I believe that setup principles are identical for all adapters (even if, of course, jumpers names vary).
1) There are jumpers to set "single/dual CPU (default)" or "Coppermine". What is correct for a CII 566. My reseller told me too use the default setting but it is the setting for a Celeron (not a CII).
2) Should the setting of these jumpers be different whether the CII 566 is overclocked or not ? ("default" at 66 Mhz and "coppermine" at 100 Mhz ?). I plan to try a 850 overclocking on my CII 566.
3) All the other jumpers can be left in there default position (I set the voltage from the BIOS) : Is it correct ?
Thank you very much for your experiences
May 29th, 2000, 01:09 PM
Set it to coppermine in both instances and see how things go. You may have to bump your voltage up a bit though.
-=S_Klass=- I tweak... therefore I am.
May 29th, 2000, 01:18 PM
set everything to default/auto and change it through the BIOS
Sign up for PayPal-Easiest way to trade/sell/pay online
May 31st, 2000, 12:02 AM
yes, use the 66MHz default FSB setting.You might want to set your default voltage to be a little higher thru the slocket for overclocking.I set mine at 1.6vc then move on up through the soft bios as I hit the 850 mark.Mine is there at 1.74vc.Seems to work fine.Good luck!
[This message has been edited by spark25 (edited 05-30-2000).]
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)