Note the rubber band holding the fan to the radiator. I couldn't find another rubber band for the second fan, so I used a wire tie and attached the fan to the fan that was held by a rubber band.
The fans blow air thru the radiator and onto the motherboard - lowering motherboard temps.
Laugh if you want to, but it works very well and I slapped it together in about 30 minutes. The benchmark scores on those 600MHz Celerons are more than enough to crush your P3@whatever speed you overclock it to. Got Hooch?™
waterblocks courtesy ofJopecooler®
[This message has been edited by TNproud2b (edited 05-28-2000).]
P4 firstname.lastname@example.org dual R134A phase change chillers with 600watt thermoelectric array. Capable of -70F
Nixie tube numeric display control panel and pneumatic motherboard tray.