C2 533@900 1.85v/1.9v, is this gonna kill my chip?

[Utini]

Title says it all, just cranked the voltage up to 1.85 (though my mobo is a bit on the harsh side, adds +0.05v usually). And I am at 900mhz, the benchmarks are great, but will my chip fry in about a week?

[Utini]

Well i thought i'd test its stability, crashed after 5 mins of half-life, i think i'll stick to 800mhz. 900 is too much for a 533 i think.

[SadSadPanda]

Or you could add more cooling, what are you using right now for cooling?

------------------
Please don't provoke the poor people..........

[Utini]

Alpha pep66 on an IWill slotket II with thermal goop. At 800mhz 1.6v/1.65v my system temp is about 34 from cold boot and rises to just above 40 under high load. I dont have a cpu diode installed atm (coz the bx6 rev2 has its diode removed) and the temp sensing cable i have lost its stickiness, and i dont have time to fix it back in there. But temp isnt a problem at this speed i expect,isnt 1.9v a too high for a coppermine even with pretty good cooling?