amdk62 550 on a fic 503+(ver.1.2a)

[oslama]

i need the jumper settings for this combo
(its not listed on fic's website)

i have updated the bios (which added 550 support)

[janzer]

funny, i was able to find the manual on the fic site...it has the jumper settings in there, but you have to have adobe acrobat to read it. the manual is in a zip format, with each file in acrobat format. go here and download the manual, not the jumpersettings:
http://www.fica.com/english/product/...et7/va503+.htm

oops...forgot something. you should set your 550 jumpersettings at 5.5 cpu multiplier, and the fsb(bus speed) at 100mhz. the core voltage is listed on the top of your processor, it should be 2.4v, but it could be 2.3v.

[This message has been edited by janzer (edited 05-26-2000).]

[grasshopper]

DIMM & SYSTEM FREQ
PC100 & PC133
sdram3 2-3
sdram2 1-2
sdram1 2-3
clk4 1-2

Non PC100 (ie 72pinSIMM)
sdram3 2-3
sdram2 1-2
sdram1 1-2
clk4 2-3

CPU Bus

100Mhz
clk3 2-3
clk2 1-2
clk1 1-2

Multiplier

5.5
freq3 2-3
freq2 1-2
freq1 1-2

Voltage
2.4V 3-4
2.5V 3-4 7-8
2.6V 3-4 5-6
2.7V 3-4 5-6 7-8

Depending on your ram, the rest is a stock setup for a k62-550! I have a VA 503+ rev 1.2A which supports ALL K6x cpu's! These should be right. Any more help, email me!

I'll scan the pages and mail them to you!




------------------
Damn you..... you killed my teacher....