WPCREDIT HELP!!
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 12 of 12

Thread: WPCREDIT HELP!!

  1. #1
    Siamese Guest

    WPCREDIT HELP!!

    Hi all Ive just built a comp using a Via 133 board.

    I know how to enable interleaving and IOQ 4, but how do i set it up so that it loads the registry file everytime

  2. #2
    Join Date
    Feb 2000
    Location
    Belgium
    Posts
    447
    First of all, I think it would be a lot easier if you would look for a BIOS upgrades incorporating those performance boosting options. The new BIOS for my Soyo board has them, as well as the ASUS bios upgrade. So check out your manufacturer's website.

    Failing that however,you can download the WCPRSET proggie from H-ODA's website. Go to www.h-oda.com and to the Downloads section. Scroll to the bottom and download the file. I guess further instructions are enclosed with the file. Never used it, just know that's how it's done I think it loads the configuration reg file at bootup. He even has a pre-modified reg file for download, specifically for the Apollo Pro 133A.
    But I recommend you to go for that BIOS update, so you can leave all this hassle behind.

    [This message has been edited by Stoffie (edited 05-26-2000).]
    We came from the stars so they say, now it's time to go back. If I was conceived today, I would not get beyond eight cells, and yet here I am. In a way they were right, I don't have the heart for this world.

    The question is, why am I having so much trouble dying?

  3. #3
    Siamese Guest
    Thanks Stoffie.

    I can't download the bios cause the board im doin this one is a Chaintech 6ata2. So Soyo and Asus bios' are out of the question.

    My other board "asus p34vx" already have all these options turned on in the default bios settings.

    thanks for da help.

  4. #4
    Siamese Guest
    Sweet stuff!

    I figured out how to use the WCPRset. it works like a charm. Boosted my memory benches by 100+ points.

    Are there any other good tweaks besides interleaving and IOQ?

  5. #5
    Join Date
    Feb 2000
    Location
    Belgium
    Posts
    447
    Set your memory timings to Turbo, or a bit lower if it crashes.
    And set your CAS latency to 2 if your mem can take it.

    [This message has been edited by Stoffie (edited 05-26-2000).]
    We came from the stars so they say, now it's time to go back. If I was conceived today, I would not get beyond eight cells, and yet here I am. In a way they were right, I don't have the heart for this world.

    The question is, why am I having so much trouble dying?

  6. #6
    Siamese Guest
    I doubt if my mem can handle it (cas2) since it's only PC-100. It runs fine at 140 (3-3-3)
    but only marginally good at 133 2-3-3. But totally fine at 133 3-3-3.

  7. #7
    Join Date
    Jun 1999
    Location
    Austin, Texas, USA
    Posts
    1,771
    Just use the program WPCRSET to load your registry with your new settings at each bootup.

    It is available from H-ODA also.


    ------------------
    Mike
    http://www.monster-machines.com
    Mike
    Mechanical Engineer
    Dell Computer Corporation
    Server Development

  8. #8
    Join Date
    Feb 2000
    Location
    Belgium
    Posts
    447
    Hey Siamese, give it a try ! I am running my two year old PC 66 CAS3 Hyundai RAM at 100 Mhz, CAS2 with no problems.

    Just give it a shot, if your RAM won't cut it, it will just freeze your puter, so if it does, then you can just dial it down a bit.

    CAS2 at high FSB does seem to make quite a bit of difference.
    We came from the stars so they say, now it's time to go back. If I was conceived today, I would not get beyond eight cells, and yet here I am. In a way they were right, I don't have the heart for this world.

    The question is, why am I having so much trouble dying?

  9. #9
    Siamese Guest

    I gave it a shot Stoffie

    but no go, I get weird errors and all1!

    oh well an extra 100+ boost in memory points aint bad at all

  10. #10
    Join Date
    Feb 2000
    Location
    Belgium
    Posts
    447
    Alright Hehe, I got a 175 points boost out of all those tweaks.

    I guess we're all just waiting for some Mushkin or EMS PC133 huh ?
    We came from the stars so they say, now it's time to go back. If I was conceived today, I would not get beyond eight cells, and yet here I am. In a way they were right, I don't have the heart for this world.

    The question is, why am I having so much trouble dying?

  11. #11
    Join Date
    Apr 2000
    Location
    Australia
    Posts
    361
    hey
    I got that exact same board
    Chaintech 6-ata2
    I got WPCREDIT and have NO IDEA whatsoever how to use it
    can someone fill me in?
    and I'm using PC 100 10ns RAM (yes I know, it came out of a celeron 266 system)
    Tbird 1400 @ 1518
    Abit KT7-A
    Leadtek GF2 Pro 230/460
    512 Meg PC-133 Cas 3 @137
    Seagate Barratcuda IV ATA 100 40Gb
    16X Pioneer Slot DVD
    8X4 Panasonic CD-R

  12. #12
    Join Date
    Feb 2000
    Location
    Belgium
    Posts
    447
    Danny, look here and here to get an idea of how and what to do...
    We came from the stars so they say, now it's time to go back. If I was conceived today, I would not get beyond eight cells, and yet here I am. In a way they were right, I don't have the heart for this world.

    The question is, why am I having so much trouble dying?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •