Securing a waterblock?
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 2 of 2

Thread: Securing a waterblock?

  1. #1
    Join Date
    Dec 1999
    Location
    UK
    Posts
    212

    Securing a waterblock?

    I am thinking of building a water block etc for my Athlon system,but how or what is the best way to secure the waterblock to the CPU.
    Is it better if I remove the heatsink and put it straight on the back plate or remove it's housing and somehow mount it directly on the chip itself?? if so what do I do about the cache chips as they sit lower than the CPU on the PCB.In either case can you suggest good ways of clamping the waterblock
    thanx in advance.......

    ------------------
    Dodge this!
    ATHLON XP@1.6
    ALPHA+120mm fan
    ABIT KR7A
    256 DDR cas2
    MATROX G550
    S.B LIVE PLATINUM
    PC-DVD
    20x10x40 CDRw
    SEAGATE 7200 28GIG
    SEAGATE "ERRICSON" 40.1GIG
    HITACHI CM761ET 19"

  2. #2
    Join Date
    Sep 1999
    Location
    Ontario Canada
    Posts
    1,349
    http://24.68.81.76/htmls/my_pc/my_pc_pg03.html

    check it out, it will be best to remove the HS and cold-plate so you can mount the block directly onto the cpu

    ------------------
    Go ahead...... lick my BLOCK
    My page is here now.
    Go ahead...... lick my BLOCK
    This is my website

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •