o/c'ing with a Voodoo Banshee card ?
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 4 of 4

Thread: o/c'ing with a Voodoo Banshee card ?

  1. #1
    Join Date
    Mar 2000
    Posts
    74

    o/c'ing with a Voodoo Banshee card ?

    Is anyone using the Voodoo Banshee AGP video card in their overclocked systems? I have a Diamond Fusion AGP & was wondering how high it will go on an o/c'ed bus before losing stability, etc.
    ~Piz

  2. #2
    Join Date
    Mar 2000
    Location
    Slovenia
    Posts
    35
    I have this card too. Never try to overclock it, because of high temperature at normal speed (about 40 C).RAM that use DMF is faster then in normal Banshee (8ns). You can oveclock it with 3Dfx VooDoo Banshee Control.

  3. #3
    Join Date
    Sep 1999
    Location
    Terborg, The Netherlands
    Posts
    691
    a friend of mine oc it to 139mhz memory and core stable. he didnt try to get any higher but i think it could do more

    ------------------
    K6-3 400 2,4V @ 448 2,6V CPUidle Epox mvp3c2 128 megs v3 2000 pci @ 170 mhz Quantum 4,3g Soundblaster Live 1024
    1400 TB @ 1350
    MSI K7T pro II
    896MB PC 133
    GF 2MX400 64MB
    Seagate 20,4G 7200RPM
    IBM 80G 7200RPM
    Soundblaster Live! 1024
    HP 9110 (8x4x32x)
    A-open 52x
    17" Fujitsu Siemens C791

  4. #4
    Join Date
    Nov 1999
    Location
    Suffolk, UK
    Posts
    3,849
    Well... I don't have a Banshee AGP, but I thought I would tell you about my experience overclocking my Banshee PCI (just to waste time). I got it to work at 37.5Mhz PCI bus easily and I overclocked the memory on it to 110Mhz from 100Mhz without a single problem (got an extra 2 fps on UT). The core was very hot before I put a fan on - then it just blew out warm air with the core being completely cold when idle when the fan was attached.

    Hoped this helped a little...

    USSVoyager

    ------------------
    Speed is everything - Warp factor 9, Mr. Sulu!

    [This message has been edited by USSVoyager (edited 04-11-2000).]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •