dynamat placement?
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 5 of 5

Thread: dynamat placement?

  1. #1
    Join Date
    Mar 2000
    Posts
    47

    dynamat placement?

    Where to best dissipate noise from fans? On the side panels of the case? On the removeable part or the chassis itself? Near the fans?

    Also, how good is carpet in comparison? [Have seen others use it as well, and in cars]


  2. #2
    Join Date
    Feb 2000
    Location
    69 Church Rd, England
    Posts
    190
    Deep - Dynamat doesn't absorb sound directly. What it does do is stops metal panels resonating. What I would do is put a big square in the middle of each panel of your case (on the inside obviously ). This will damp down any case resonance perfectly but you will still be able to hear the fans.

    ------------------
    Just got an Athlon? Join Seti at Athlon Owners Club

    Also, Team website
    Just got an Athlon? Join Seti at Athlon Owners Club

    Also, Team website

  3. #3
    Join Date
    Mar 2000
    Posts
    47
    thank you for your reply, fishman. how does carpeting compare? I'm not a sound expert but do know that subwoofer boxes are sometimes lined with carpet...?


  4. #4
    Join Date
    Sep 1999
    Location
    Vienna, Austria
    Posts
    944
    I am about to line the inside of some of my panels with a thin layer of styrofoam to see how well this will work.

    I tested this briefly by just sticking it there with tape and it makes a difference - it damps out some frequencies anyway.

    I am not going to try carpeting though - I just dont like the idea of carpet inside my housing

    Edited to fix some of the typos caused by this stupid keyboard.

    ------------------
    // Black Holes are where God divided by zero //

    [This message has been edited by Tiberia (edited 04-05-2000).]
    // Black Holes are where God divided by zero //

  5. #5
    Join Date
    Mar 2000
    Posts
    47
    This is a response I got from someone whose done some work on noise reduction :

    I've had tremendously good experience with carpets glued to the inside of
    the case. Dynamat only helps to keep the vibration to a minimum. That's why
    they are used on the under body of cars. They don't really absorb energy
    from an accoustical wave. Foams are too soft. That makes carpets
    perfect, it absorb almost the whole range of frequencies, which are hearable
    for the human ear. The lower Hz can't be absorbed but the upper Hz, which
    are created by fans, harddrives etc. are cut out by more than 50%.
    Please look at my case to see an example for a com with carpets. If you're
    willing to do some cutting and hot glueing (double sided tape also ok) with
    carpets, e-mail me and I'll help you through the project.



    [This message has been edited by deep (edited 04-05-2000).]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •