You might be alright at your present temperature. As you approach the freezing mark, I guarantee the cold CPU will 'transfer the cold' (remove the heat from) thru the socket base and condensation will form on the backside of the Slocket and inside the socket itself. If you don't see any moisture on the back of the card, you're OK. Most people insulate the entire Slocket card, front and back.
P4 email@example.com dual R134A phase change chillers with 600watt thermoelectric array. Capable of -70F
Nixie tube numeric display control panel and pneumatic motherboard tray.
ok maybe ill insulate the whole thing just to be safe...where do i get closed cell foam?
hardware store?well i idle at 14c and surf the web at 18c and the highest peak i get is 32c with 3dmark...this is cool eough for me..i didnt put a pelt on for any reason i was fine before just did it for the fun of it.. the back side of the slocket isnt even cool..i was just worried about the cpu pins because the outer parts of the cpu must be cooler than the core right?
[This message has been edited by Hardware911 (edited 04-02-2000).]
BAD BAD BAD i pulled it apart an there was moisture btween the cold plate and the pelt...took it all off for now till i can insulate it better..gonna try to fix it up tommorow it looks like its gonna be a ***** to insulate the whole slocket so its air tight any ideas?