February 26th, 2000, 05:00 PM
----- Help me OC a Celeron 366 -----
How do i oc a Celeron 366, my main board is a Intel 440BX/ZX...
help please, i've never oc'ed anything but my voodo3 3500.
February 26th, 2000, 05:34 PM
If its a intel-board you can most likely forget about it cause intelboard have only standard FSBs (66 and 100)....
Visit my homepage:
Duckman's Wild Page
Site Content: Overclocking, cooling and a lot of BS about Me, Myself and I.
Sorry, I didn't hear you, I was staring at your breasts.
February 26th, 2000, 05:37 PM
blunt but unfortunately true
oh really so what do you spread on roast DUCK
visit my website at http://www.coldfusion.org.uk
Ok no more DUCK
visit my Website!
February 26th, 2000, 06:43 PM
February 26th, 2000, 06:55 PM
But 100 FSB would get you 550MHz, you should at least try it if you have the option.
P4 firstname.lastname@example.org dual R134A phase change chillers with 600watt thermoelectric array. Capable of -70F
Nixie tube numeric display control panel and pneumatic motherboard tray.
February 26th, 2000, 07:54 PM
550MHz is a little much without extra cooling, but how do i change to 100 FSB?
February 26th, 2000, 10:52 PM
You might be able to do it with stock cooling. What are the numbers under the CPU? Pop that sucker up and tell us what they are.
February 26th, 2000, 11:15 PM
I have a 22 week celly 366 on a Abit bh6 mobo.I use just a stupid socket7 cooler and its working rock stable at 100fsb without even increasing the voltage.Maybe you could try it too.
February 26th, 2000, 11:49 PM
you should be able to set the fsb with jumpers documented in the mb manual. for cooling you could try using the global win FDP 32 heatsink/fan. it works perfectly on my o/c celeron 366 to 550
Athlon XP 1700+@1900+
ATI All-in-Wonder Radeon
512 MB DDR RAM
Linksys 10/100 NIC
Pioneer 16x DVD ROM
Sony 24x10x40 CD/RW
2x30.7 gig Maxtor DM+ 45 in RAID 0
February 27th, 2000, 12:34 AM
I can do it through BIOS, according to:
one more program to figure out...
February 27th, 2000, 03:24 AM
I have a week 28 Malaysian 366 that will only last 5 min in Windows at 100 FSB in a BE6 even at 2.3v. Yet I have a week 31 300a that in the same slotket with the same RAM and system will run without any problems at 100 FSB at 2.0v.
I expected no problems with a week 28 malaysian 366 but it looks as though this one is a lost cause. I don't see any point of lapping it and slapping on a huge heatsink if I have increase the voltage to 2.4v to get it to run at 100 FSB. I'm not going to run it in my BE6 at 83 FSB.
Windows 98SE 128Mb RAM
BE6 366 on an ASUS 370D slotket
LeadTek 3D S320-II Ultra
IBM 6.4Gb 5400rpm
IBM 13.6Gb DJNA-371350 7200rpm ATA-66
February 27th, 2000, 03:42 AM
I just bought another 366 PPGA SL36C Pre-Tested to 550 @ 2.0v, This guy had 1200 of them and he said its about 50\50 chance of gettin one thats overclocks to 550, some will do it @ 2.0v and some it takes up to 2.4v, only a handfull will hit 605 and he sells them for a premium. I bought 1 from him that does 567mhz @ 2.1v for $76.00.
February 27th, 2000, 09:54 AM
Mine was pretested, it ran me $175 Can., so you can see why i'm skepticat about melting it.
February 27th, 2000, 12:19 PM
I got a 366a for 75 bucks here in Toronto and I've been running it at 550 from day one - rock solid - just a good heatsink and fan using heatsink compound. Maximum cpu temp so far - around 46 c.
February 27th, 2000, 12:32 PM
was it pre-tested and which week?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)