----- Help me OC a Celeron 366 -----

[shifty00]

Hi,
How do i oc a Celeron 366, my main board is a Intel 440BX/ZX...
help please, i've never oc'ed anything but my voodo3 3500.

------------------
shifty00

[Duckman]

If its a intel-board you can most likely forget about it cause intelboard have only standard FSBs (66 and 100)....

Duckman

------------------
------------------------
Visit my homepage:
Duckman's Wild Page
Site Content: Overclocking, cooling and a lot of BS about Me, Myself and I.
Sorry, I didn't hear you, I was staring at your breasts.

[-coldfusion-]

blunt but unfortunately true

------------------
oh really so what do you spread on roast DUCK

visit my website at http://www.coldfusion.org.uk

[shifty00]

I guess i'm stuck w 66

[TNproud2b]

But 100 FSB would get you 550MHz, you should at least try it if you have the option.

[shifty00]

550MHz is a little much without extra cooling, but how do i change to 100 FSB?

[todays]

You might be able to do it with stock cooling. What are the numbers under the CPU? Pop that sucker up and tell us what they are.

[bsakis]

I have a 22 week celly 366 on a Abit bh6 mobo.I use just a stupid socket7 cooler and its working rock stable at 100fsb without even increasing the voltage.Maybe you could try it too.

[dragonheart]

you should be able to set the fsb with jumpers documented in the mb manual. for cooling you could try using the global win FDP 32 heatsink/fan. it works perfectly on my o/c celeron 366 to 550

[shifty00]

I can do it through BIOS, according to:
http://developer.intel.com/design/motherbd/bi/bi_ds.htm

one more program to figure out...

[cutebird]

I have a week 28 Malaysian 366 that will only last 5 min in Windows at 100 FSB in a BE6 even at 2.3v. Yet I have a week 31 300a that in the same slotket with the same RAM and system will run without any problems at 100 FSB at 2.0v.

I expected no problems with a week 28 malaysian 366 but it looks as though this one is a lost cause. I don't see any point of lapping it and slapping on a huge heatsink if I have increase the voltage to 2.4v to get it to run at 100 FSB. I'm not going to run it in my BE6 at 83 FSB.

My system:

Windows 98SE 128Mb RAM
BE6 366 on an ASUS 370D slotket
LeadTek 3D S320-II Ultra
SB Live
IBM 6.4Gb 5400rpm
IBM 13.6Gb DJNA-371350 7200rpm ATA-66

[flat-v8]

I just bought another 366 PPGA SL36C Pre-Tested to 550 @ 2.0v, This guy had 1200 of them and he said its about 50\50 chance of gettin one thats overclocks to 550, some will do it @ 2.0v and some it takes up to 2.4v, only a handfull will hit 605 and he sells them for a premium. I bought 1 from him that does 567mhz @ 2.1v for $76.00.

[shifty00]

Mine was pretested, it ran me $175 Can., so you can see why i'm skepticat about melting it.

[gfeeny]

I got a 366a for 75 bucks here in Toronto and I've been running it at 550 from day one - rock solid - just a good heatsink and fan using heatsink compound. Maximum cpu temp so far - around 46 c.

[shifty00]

was it pre-tested and which week?