I BOILED MY K6!!!
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 3 of 3

Thread: I BOILED MY K6!!!

Hybrid View

  1. #1
    Join Date
    Jan 2000
    Location
    Canada
    Posts
    101

    I BOILED MY K6!!!

    OOPS!! I think I hurt my processor because when I was washing it to get the sandpaper dust off of it(I sanded the tin plate flat)I made a mistake and hit the cold water off before the HOT!! When I yanked the K6 out of the water stream,(burning my hand in the act) I could hardly hang on the processor!!! So I quickly snap on only the cold water and put it under COLD water(winter time here) After drying it I put it back in and It runs 2c hotter and I cant get 504mhz out of it at 2.8V any more. I will keep it at 450@2.3v for a while and see if it comes out of shock!! DOUGH!!!

    ------------------
    Proud Owner Of An AMD K6-2\400@504 MEGAWHOPPERS
    P2-350@466<133FSB>|64MB Dram
    13Gig Quantum 7200
    CL 8X Rom|CL AWE 64 Gold
    Voodoo 3 3000 166@205mhz

  2. #2
    Join Date
    Aug 1999
    Location
    Washington, PA
    Posts
    878
    If your processor was really hot you should have let it naturally cool. It is like if you heat glass and put it in cold water it cracks then it changes size. Otherwise, good luck! When my celerons' fans fell off the case and they overheated, I couldn't get them to work together anymore.
    I'm not racist! I have a color TV!

    www.crosswinds.net/~areyoubored

  3. #3
    Join Date
    Feb 2000
    Location
    Virginia, USA
    Posts
    46
    I could have told you sanding A K6 Doesn't help much and can cause problems
    aluminum dust can get under the plate
    unless you fill the gaps around the edges
    it's only attached at corners and middle to core
    I have K6-III that I sanded with 0 temp change so I went the extra mile
    (I don't recomend this unless willing to kill CPU)
    and removed the plate still running same temps
    next try will be copper cold plate with pelter & Alpha

    now if I could just find the site I was going to order it from forgot name of site (& lost the link to HD format)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •