Overclocking 466 on BP6?
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 4 of 4

Thread: Overclocking 466 on BP6?

Hybrid View

  1. #1
    Join Date
    Sep 1999
    Toronto, Ontario

    Overclocking 466 on BP6?

    Hi everyone, I am just about to get an ABIT BP6 (dual-celery), and I was just wondering how good are they on overclocking, (sounds like a dumb Q,since it has Softmenu II™ and separate voltage settings for each processor but I would like to hear from ppl's experience overclocking it.) I'm gonna put 466 celerys on it, Could it do a 550 easily?
    Drink Varnish and You'll have a lovely finish

  2. #2
    Join Date
    Jun 1999
    Atlanta, GA
    I can't speak personaly about the BP6, but I understand set-up wise it is same as other Abit boards..

    I would not expect more than 525 from 466 though... (FSB = 75).. the 7 multiplier on the 466 is a bottleneck..

    7 x 83 (581) and 7 x 100 (700) are pretty unrealistic..

    If you want to do 550, get a couple of the pretested 366's... They are going for about the same price as a retail 466...

    [This message has been edited by Diogenes (edited 09-21-99).]
    "If it works it's not overclocked!"
    My Stuff

  3. #3
    Join Date
    Mar 1999
    Go with the 366 Celerons and run them at 550 MHz. Generally if they are Malay week 21 or better they will run at 550 MHz @ 2.0 volts. I have two on a BP6, a week 27 and a week 32, both run solid at 550 MHz@2.0 volts.

  4. #4
    Join Date
    Oct 1999
    I have 2 466 Celerons and both do 602 MHz and boot into Win98SE but will not boot into W2K or NT4 at above 525, any ideas??

    P.S. Chips are stable @602 i.e. runs Prime95 RC5 and Unreal Tournament

    [This message has been edited by Josidiah (edited 10-21-99).]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts