Pentium III 450
Home | Reviews and Features | Special Reports | Forums |

Results 1 to 4 of 4

Thread: Pentium III 450

  1. #1
    Join Date
    Aug 1999
    Myrtle Beach, SC

    Pentium III 450

    Any problems with overclocking this at 500?
    I just want a little more speed. Thank you.

  2. #2
    Join Date
    Jun 1999
    Austin, Texas, USA
    If you a retail unit and some good cooling you should be able to attain 504 (4.5*112) very easily, I would go for 526.5 (4.5*117) or 558 (4.5*124) You may have to set your ram to cas3 though.

    [This message has been edited by Dimarini (edited 08-08-99).]
    Mechanical Engineer
    Dell Computer Corporation
    Server Development

  3. #3
    Sterling_Aug Guest
    I have my PII-450 running at 558 MHz @ 2.2 volts.

    Most PIII-450 will run at 581 MHz @ 2.0 volts, but you need EXCERLLENT cooling to do it safely.

  4. #4
    Join Date
    Jan 1999
    Mobile, Al USA
    The easiest over clock is 558MHz with a FBS of 124Mhz if your RAM will make the trip. Set you AGP to 2/3 and disable speed error hold. You pherphials normally run better at the semi-std bus speed. Cooling even with the factory heat sink is adequate and the default voltage of 2.0V should work most times. The 450 normally runs warm but unless really push will not lock up on you.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts